How To Remove Battery From Htc Evo 4g

HTC EVO 4G Glass Touch Screen Digitizer + LCD Repair Guide

June 4, 2022 | 0 Comments

HTC EVO 4G Glass Touch Screen Digitizer + LCD Repair Guide

View the downloadable version of our how to fix your HTC Evo 4G screen guide

This guide shows how to disassemble the HTC EVO 4G cell phone quickly and safely. This guide is designed by the Repairs Universe squad.

This guide will assistance you to install the post-obit HTC EVO 4G office(south):

HTC EVO 4G LCD Screen Replacement Brandish
HTC EVO 4G Drinking glass Touch on Screen Digitizer

Tools Required:

Safe Open Pry Tool
Modest Phillips Screwdriver
T5 Torx Screwdriver
Pair of Tweezers (optional)
Hot Air Gun / Pilus Dryer (optional)

HTC Evo 4G Glass Touch Digitizer Repalcement Repair Guide

HTC Evo 4G LCD Screen Replacement Repair Guide

HTC EVO 4G Written Have Apart Repair Guide:

Figure 1

First of all remove the back cover (battery encompass) of the phone using a safety open up pry tool. Carefully insert the pry tool betwixt the edge at the dorsum of the phone as indicated past the arrows in figure 1 and pry the embrace off. The battery cover should come up off quite easily.

Figure 2

Remove the battery and the SD card from the phone equally well. To remove the SD carte yous volition need to pop the tab first at the location shown in figure ii then take out the SD card. You may employ a pair of tweezers if yous find it difficult to remove the retentivity card with your hand.
At present in lodge to remove the dorsum-frame of the phone y'all will need to unscrew six Torx screws. Using a T5 Torx screwdriver, remove these six screws from the locations shown in the figure two.

Figure iii

One time y'all have removed the screws y'all can carefully pry the back-frame off using safety open pry tool. Insert prophylactic open pry tool between the edge that separates the frame and the body of the phone and run it along the sides to unclip the clips. The removed back-frame volition wait similar to the figure 3.

Figure iv

The adjacent pace is to remove the mainboard (logic board) from the unit. In order to remove the mainboard y'all will have to unscrew a Phillips screw first and then disassemble three ribbon cable connectors.
Remove the screw first using a minor Phillips screwdriver from the location shown in the figure 4 by a small circle 1.
Disconnect the three ribbon cable connectors using prophylactic open up pry tool at the locations A, B and C in the effigy 4.

Effigy five

The mainboard will now be released and y'all can have it off from the telephone assembly and put it bated.
Lift out the photographic camera from its location indicated by orange arrow in figure 5 and and so carefully pry up the ribbon cable which will be glued at the dorsum of LCD indicated by gray arrow in figure five. Notation that you need to lift up this cablevision from its colored end (which you have disconnected from the mainboard) and then pry information technology off from the back of LCD. Do not pull information technology off completely from the unit because it is a part of drinking glass screen (touch screen digitizer).
Using a condom open pry tool, carefully pry upward the front glass screen from the unit. Annotation that the glass screen will exist adhered to the unit all forth the sides with an adhesive fabric and you may have to use a hot air gun / hair-dryer before prying up the front end glass screen.
After you take the glass screen digitizer completely pried off, gently lift it upward from the unit of measurement because you will have to run the ribbon cable through the gap to completely split up it from the assembly.

The HTC EVO 4G is now disassembled and you can supplant the damaged office(s) with new ones. Reverse the instructions above to reassemble your phone.

Replacing HTC EVO 4G Speakers

If your HTC Evo 4G is having issues with the audio quality from either the loud ringing speaker or the earpiece speaker, using these videos volition guide yous through safely replacing your speakers. The RepairsUniverse squad has compiled all the information needed for nearly anyone to prepare a damaged or faulty ear or loud speaker and make their Evo 4G audio new again!

This guide will assist you to install the post-obit HTC EVO 4G parts:

HTC EVO 4G Loud Speaker Replacement
HTC EVO 4G Earpiece Speaker Replacement

Tools Required:

Safe Open Pry Tool
Minor Phillips Screwdriver
T5 Torx Screwdriver

Optional Tools:

Small Flathead Screwdriver
Adhesive Strips - May be required for certain speakers.

HTC Evo 4G Loud Speaker Replacement Guide:

Notation: Some speakers may need to be raised, using agglutinative, to give full contact with the connectors. Yous may endeavor to re-use the previous adhesive from an one-time speaker, merely fresh adhesive is recommended.

HTC Evo 4G Ear Speaker Replacement Guide:

Annotation: Some speakers may need to be raised, using adhesive, to give full contact with the connectors. Y'all may effort to re-use the previous agglutinative from an old speaker, simply fresh adhesive is recommended.

Notice:

These replacement instructions are for informational purposes only. These are published on the http://www.repairsuniverse.com spider web site gratis of accuse and without whatsoever kind of warranty. We will not accept any liability for damage or injury caused whilst following this guide.

The figures / diagrams are meant for guiding users about the locations of different parts of the device simply these are not drawn to calibration.

Reproduction:

We strictly prohibit whatsoever amending or modification of the format or presentation of this guide for inclusion within other web sites and publications or otherwise. If you lot would like to make this guide available to other people, please practise so by fashion of a hyperlink. You may print a copy of this guide for distribution, only if the entire layout is included and without any modification.

Source: https://www.repairsuniverse.com/blogs/repair-guides/htc-evo-4g-glass-touch-screen-digtizer-lcd-repair-guide